Technosoft's TMC-3D multi-axis motion controller executes G-code applications

TMC-3D, the Technosoft (Bevaix, Switzerland; www.technosoftmotion.com) multi-axis motion controller, is now adapted to execute G-code commands.

TMC-3D, the Technosoft (Bevaix, Switzerland; www.technosoftmotion.com) multi-axis motion controller, is now adapted to execute G-code commands. G-code is a language, used in numerical control programming, that executes various movements such as: piece cutting, profile shaping or drawing, etc. In order to achieve these particular kinds of movement, the numerical control uses basic blocks which carry one or more words, each word consisting of a letter—detailing the function to be performed—followed by a number that assigns value to the function (e.g., N0001 G90 G00 Y125 X2 A23 B-1). The G-code information is translated into TML commands through the G-code to TML converter integrated in the EasyMotion Studio software. The G-code files are imported into EasyMotion Studio and translated to TML commands. After the conversion process, TMC-3D will send the motion sequences to the drives/motors which execute the movements. The TML converter allows you to set the basic movement parameters specific to the G-code: linear axes, cycle start button, choose the measure units, set the Traverse and Feed rates. Technosoft's G-code–to–TML converter supports various G-code words, letters and parameters together with unary and binary operands.

More in Home