Lüneburg, Germany – Signs made of acrylic are found everywhere and yet they are mostly individual in appearance. These signs are ideally suited for use on public buildings, shops, office premises and even for private use. Digitally printed on the reverse side and provided with the respective message, they give the desired information to anyone looking at them.
Acrylic is a perfect material for CO2 laser processing because neither laminations nor printing has any negative effect whatsoever. The result is independent of the skill of the machine operator, because the finished product is created in virtually one work step. No post processing of the edges is necessary.
Benefits of laser cutting are:
- Clear, smooth cut edges in one operation
- Processing with protective foil
- Chipless processing
- No clamping needed
- Boreholes can be made simultaneously during processing
- High contour accuracy thanks to optional camera recognition
Reverse printed acrylic is most impressive with its high-quality appearance and it can be manufactured in any desired shape using laser cutting. The surface is neither damaged nor soiled. Thus, there are no limits to the design possibilities. Lighting effects enhance the impression even further.
Eurolaser GmbH offers a CO2 laser-based acrylic cutting system with flexibility to cut prototypes and production batches. A shuttle table handling acrylic sheets up to 297 mm by 400 mm is provided.
For more information, contact eurolaser GmbH: email@example.com.