DISEASE DETECTION/ENVIRONMENTAL MONITORING: Novel design makes mid-IR fiber laser super-sensitive for breath analysis

March 18, 2014
A fiber laser able to produce 25 times more light than other lasers operating at a similar wavelength has proven able to detect very low concentrations of gases.

A fiber laser able to produce 25 times more light than other lasers operating at a similar wavelength has proven able to detect very low concentrations of gases.1 Operating in the mid-infrared (mid-IR) frequency range, the band in which many important hydrocarbon gases absorb light, it promises use in detection of diseases such as diabetes, wherein minute amounts of gases not normally exhaled can be detected in the breath. This invention of researchers at Australia's University of Adelaide is also promising for remote sensing of greenhouse gases.

"The main limitation to date with laser detection of these gases has been the lack of suitable light sources that can produce enough energy in this part of the spectrum," said project leader David Ottaway. "The few available sources are generally expensive and bulky; optical fiber makes the new laser more affordable, less bulky, and also easier to work with."

Researcher Ori Henderson-Sapir explained that a novel approach helped to overcome the hurdles that have prevented fiber lasers from producing sufficient power in the mid-IR. An erbium-doped, zirconium-fluoride-based glass fiber laser operated at 3.6 μm—the deepest mid-IR emission from a fiber laser operating at room temperature—and achieved 260 mW in continuous-wave mode. Using two wavelength pump sources let the researchers leverage long-lived, excited states that would normally cause a bottleneck, and this enabled maximum incident optical-to-optical efficiency of 16% with respect to the total incident pump power. Both output power and efficiency are an order-of-magnitude improvement over similar lasers demonstrated previously. The fiber laser also exhibited the longest wavelength of operation to date for a room-temperature, nonsupercontinuum fiber laser.

The laser has the promise of efficient emission from 3.3 to 3.8 μm, meaning it has incredible potential for scanning for a range of gases with high sensitivity—making it very useful for diagnostics and sensing.

1. O. Henderson-Sapir, J. Munch, and D. Ottaway, Opt. Lett., 39, 493–496 (2014).

About the Author

Barbara Gefvert | Editor-in-Chief, BioOptics World (2008-2020)

Barbara G. Gefvert has been a science and technology editor and writer since 1987, and served as editor in chief on multiple publications, including Sensors magazine for nearly a decade.

Sponsored Recommendations

Request a free Micro 3D Printed sample part

April 11, 2024
The best way to understand the part quality we can achieve is by seeing it first-hand. Request a free 3D printed high-precision sample part.

How to Tune Servo Systems: The Basics

April 10, 2024
Learn how to tune a servo system using frequency-based tools to meet system specifications by watching our webinar!

Motion Scan and Data Collection Methods for Electro-Optic System Testing

April 10, 2024
Learn how different scanning patterns and approaches can be used in measuring an electro-optic sensor performance, by reading our whitepaper here!

How Precision Motion Systems are Shaping the Future of Semiconductor Manufacturing

March 28, 2024
This article highlights the pivotal role precision motion systems play in supporting the latest semiconductor manufacturing trends.

Voice your opinion!

To join the conversation, and become an exclusive member of Laser Focus World, create an account today!