Laser Welding Equipment

Home>Topics>Laser Welding Equipment
Refine Results
  1. All
  2. Online Articles
  3. Magazine Articles
  1. ZF relocates lasers for shock absorber production

    Starting in March 2016, technical services provider Voith Industrial Services (Schweinfurt, Germany) relocated ZF Friedrichshafen AG (Friedrichshafen, Germany)'s complete shock absorber production facilities from Schweinfurt to the company's Eitorf, Germany location, which is approximately 300km away. Disassembly and reassembly of the production lines, racking systems, and individual machines were carried out in two steps. While some of the facilities were disassembled and reassembled in Eitorf for trial operation, part of the production continued in Schweinfurt. Only after the project had been ramped up and the team had ensured proper functioning of the equipment in Eitorf, the remaining shock absorber production equipment was disassembled in Schweinfurt. Relocation of ZF's complete plant and equipment, including shock absorber production facilities. VF contracted Voith Industrial Services with coordinating disassembly of the laser welding equipment used for shock absorber production. The highly sensitive laser system had to be transported in special shock-absorbing packaging and reassembled by experts in Eitorf. Voith cooperated closely with the laser manufacturer in this regard. Now that ZF's factory building in Schweinfurt—previously used for shock absorber production—is empty, core removal activities will begin. ZF contracted Voith with installing hybrid production facilities in the building. For more information, please visit www.voith.com and www.zf.com .

    Online Articles

    Online Articles

    Mon, 29 Aug 2016

  2. Chinese laser equipment market growth falls in 2012 and 2013

    Although China laser equipment installation is increasing, the market growth rate fell to below 10% due to weak downstream demand, says a new report.

    Online Articles

    Online Articles

    Tue, 3 Dec 2013

  3. Seeing the light

    Tool die and mold repair shops have been hit pretty hard economically in the past couple of years.

    Magazine Articles

    Magazine Articles

    Tue, 1 Mar 2005

  4. Welding industrial gas turbine components

    Laser welding hot-section components of industrial gas turbines with low distortion allows near-net-shape component reconstruction.

    Magazine Articles

    Magazine Articles

    Fri, 1 Jul 2005


Follow us at Join us on

Twitter - Industrial Laser Solutions

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS