Quicker fix

Forming, punching, or die casting tools undergo great strain in their every day use. Over time tolerances change because wear or damage is inevitable. Conventional repair methods, such as TIG welding, are time-consuming and costly, often producing distortion, softening, and the formation of cracks, which can limit its choice in certain applications. And frequently the final result does not meet the high quality standards of the tool and mold making industry. Components that have been produced in a refurbished mold may even fail the strict quality tests performed by the end customer. As a result, the mold must be replaced.


Figure 1. Deposit welding along the edge without modification of the basic structure.
Click here to enlarge image

The solution for these constraints and problems is laser deposit welding (see Figure 1), which can be done on site, requiring a minimum of pre- and post-processing, while achieving material qualities that are equal to the original product when new.

Advantages of laser welding


Figure 2. Only laser welding allows welds on the spot also near interfering contours or in small cavities.
Click here to enlarge image

The energy in the laser beam welds a hand-guided filler wire onto the workpiece with great accuracy and high strength. Wires with a diameter as small as 100 microns can be processed—clear evidence of the unrivaled high accuracy of this technology. A low heat-affected zone, rapid heating and cooling in the fushion area, and exact control of the beam power via pulse shaping are factors that provide a minimum thermal load on the workpiece. For crack-sensitive materials the mold is not pre-heated. Processing is spot-accurate, even in small geometries and places where access is difficult (see Figure 2). A unique tilt-adjustable optical system lets you work on vertical surfaces without rotating or tilting the mold. The accuracy of laser deposit welding saves complex post-processing with the milling machine. In many cases, finishing of the seam weld with a drawing die suffices.

Laser vs. TIG and micro-plasma welding

Laser welding is compatable with base materials up to 64 HRC. It can repair damage, locally improve wear resistance, and correct production defects with a quality that can be achieved only with laser deposit welding. The micro-structural transformation is much lower than with other technologies. Through the use of filler materials with a high melting point, significantly better layer properties are obtained. Laser deposit welding guarantees high-quality repairs, which are fully recognized by the customer as the appropriate method due to the high standard of laser welding.


Figure 3. Layers or surfaces are welded with a filler wire with high precision layer by layer.
Click here to enlarge image

Damaged or worn molds need no longer be thrown away and there is no complicated, costly, and time-consuming tool transport to the repair shop, nor external repair costs. So non-productive downtime can be reduced. Response time to design changes and modifications can be reduced. And, last but not least, laser technology is a new future-oriented competence center. Experience has shown that a deposit laser welding system pays for itself after only 1–2 years-even with only a few applications.

Laser units such as Rofin Baasel's StarWeld Tool Open with 150 W/100 J are ideal for welding aluminium and copper. This class IV system opens up new frontiers in laser welding by bringing the laser to the workpiece where repair work can be done on site, directly on the machine without costly disassembling.


Figure 4. The patented swivelling optics enable welds on undercuts.
Click here to enlarge image

Large access doors and a solid and precise motor-driven XY-table allow the StarWeld Tool Integral to take workpieces with a 50cm edge length and a maximum weight of 350 kg: this allows large tools and molds to be processed efficiently by the laser. The patented swivelling optics (see Figure 4) that can be swivelled around two axes allows processing of vertical surfaces, undercuts and deep grooves without rotating or tilting the workpiece. Thus setup times can be reduced.

Contact Thomas Renner at Rofin/Baasel Lasertech, e-mail: thomas.renner@baasel.dd.



Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now
ILS Blogs
David Belforte
David Beleforte

Let's grow LME

Mon Apr 22 08:51:00 CDT 2013

Looked at manufacturing lately?

Wed Mar 20 09:57:00 CDT 2013

Industrial laser market meets forecast

Fri Mar 08 10:59:00 CST 2013

Photonics West features ultra-fast and fiber lasers

Mon Feb 18 13:31:00 CST 2013

Follow us at Join us on

Twitter - Industrial Laser Solutions

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS