High-power laser sensors


North Logan, UT - Ophir Photonics Group has debuted high-power laser sensors and scatter shield accessories for measuring large and divergent laser sources, such as diode stacks and arrays.

The 6000W-BB-200x200 and L2000W-BB-120 are water-cooled laser sensors for measuring the power and energy of very large, high-power laser beams. Both have broad spectral response from 0.19 to 20µm. The L2000W-BB-120 includes a "Smart Connector" interface that operates with the company's StarLite, Nova II, and Vega smart displays, and Juno PC interface. It can also be directly connected to a PC via RS232.

The L100(500)A-PF-120 is designed for high-peak-power, high-energy measurements over a 0.15–20µm spectral range. The L100(500)A can measure single-shot energy of high-peak-power, short-pulse lasers at up to 3J/cm2. It can also measure high-power lasers for short (~1s) exposures at up to 6000W, and can continuously measure up to 100W (500W with heat sink).

The company's high-power 10K-W and 30K-W laser sensors have high absorbance, but 3–4% of the light is still backscattered. This can heat surrounding surfaces of the sensor. The 10K-W and 30K-W scatter shields reduce this backscatter by about 70%.

For more information, please visit www.ophiropt.com/photonics.

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now

Follow us at Join us on

Twitter - Industrial Laser Solutions


There is no current content available.
There is no current content available.

See Article Archive

View Industrial Laser Solutions past articles.

Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS