Laser cutting at a slant

EuroLaser 1-V-Groove

Lüneburg, Germany - Users of laser cutting systems often ask if it is possible to cut at a slant or to cut materials to mitre. This question arises time and again for point of sale (POS) materials, such as in acrylic displays and in case of machining sandwich or lightweight foam boards in particular.

Eurolaser, a provider of CO2 laser cutting technology, has one answer. The company’s laser is configured to meet the material surface at a 90 degree angle. However, it is also possible to install diverse tools from Swiss maker Zund and thus significantly extend the machining range and create slanting cutting edges as well.

For example, the material can be cut at an angle of 45 degrees with the tool positioned at a slant, which means a wedge can be cut out. The wedge in turn enables the material to be “bent” into a 90 degree angle. The outer top layer is not damaged so that a perfect outer edge is created. This way users can cut sandwich and lightweight boards to mitre.

Acrylic and other solid materials are furnished with a V-groove (see figure at top) with a special milling cartridge. In this way, bevels (slanted surfaces on the workpiece edges; see figure directly below) and counterbores (see figure at bottom) can be created.



Typical materials are sandwich boards, lightweight foam boards, solid board, acrylic, and wood.

The process is typically intended for exhibition stands and store construction, promotional stands and displays, mounts, and model making.

With the tools installed in parallel to the laser, eurolaser offers a good and efficient alternative. The machining range will be extended, and it will additionally be possible to process materials that are not suited to the laser.


Source: http://www.eurolaser.com/service/faq/can-i-also-cut-at-a-slant-with-the-laser/



EuroLaser 3-Counterbores

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now
ILS Blogs
David Belforte
David Beleforte

Let's grow LME

Mon Apr 22 08:51:00 CDT 2013

Looked at manufacturing lately?

Wed Mar 20 09:57:00 CDT 2013

Industrial laser market meets forecast

Fri Mar 08 10:59:00 CST 2013

Photonics West features ultra-fast and fiber lasers

Mon Feb 18 13:31:00 CST 2013

Follow us at Join us on

Twitter - Industrial Laser Solutions

PRESS RELEASES

Replacement lenses from II-VI Infrared eliminate need for beam centering

II-VI Infrared, the world leader in CO2 laser optics, is now providing replacement Trumpf Cut Len...

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS