Four beam sources

TruMicro_5000_S

Farmington, CT - Among other products, Trumpf introduced four new beam sources to its portfolio of short-pulse and ultra-short-pulse lasers for the micro-processing of materials at Laser World of Photonics in Munich.

The infrared-wavelength TruMicro 5080 expands the power capability of picosecond lasers to over 150 watts average output, breaking another record for industrial-use ultra-short-pulse lasers. The frequency-doubled, green-wavelength variant, the new TruMicro 5280, also surpasses the 100-watt mark for average output. However, Trumpf is also strengthening its portfolio at the lower-power end of the spectrum. The new picosecond lasers from the TruMicro Series 2000 are entry-level models for micro-processing materials in the low-average-output range. Together with their high beam quality, this makes them suitable for applications such as cutting polyimide and structuring glass. Trumpf also offers this series in green and infrared wavelengths. 

Trumpf also presented its new TruMark Series 1000. The new infrared-wavelength marking laser has an extremely compact design: the beam source, power supply unit, computer, and even the scanner all fit inside a box which is the size of a shoe box and weighs only around ten kilograms. This makes it easy to integrate the laser into both existing and new production lines. Although the marking laser represents an affordable entry point into the world of laser marking, it also bears comparison with the TruMark Series 3000 and 5000 in terms of quality and functionality, as readily testified by the automatic focal position control of TruMark 1000. But Trumpf is also expanding its marking laser portfolio at the higher end of the output scale. The new fiber laser from the TruMark Series 5000 is suitable for the rapid processing of high quantities of both metal and plastic parts. 

Another new product was the direct diode laser generation with output powers of up to six kilowatts for brazing and cladding. The new TruDiode 6006 has an energy efficiency of 40 percent and extremely low operating costs in general. This is all down to a simple, space-saving laser concept, reportedly making TruDiode 6006 the most compact diode laser in its power class available on the market. 

Also on exhibit at the trade fair was the new generation of TruDisk disk lasers, which deliver laser output powers of up to six kilowatts from a single disk. This facilitates an even more compact design and leads to a significant reduction in operating costs of up to 25 percent. Special attention was devoted to bringing down energy consumption. The efficiency of the new generation is as high as 30 percent. A redesigned control system with intelligent energy management ensures that the laser is always in an optimum energy state, even during breaks in operation. The new generation also scores highly for being robust even under extreme environmental conditions. The youngest member of this series is the new TruDisk 2000, which was exhibited for the first time in Munich. 

Trumpf also presented a compact and robust CO2 laser for processing metallic and non-metallic materials. TruCoax 1000 achieves very good beam quality of over 1.1 M2 and a peak pulse output of up to several kilowatts, enabling extremely fast and precise processing. Furthermore, the geometrical and optical specifications of TruCoax 1000 ensure outstanding beam and output stability and hence reproducible application results even at high speeds and during the whole service life. The coaxial laser works with a transistor-driven high frequency generator, which fits under the hood of the laser. This makes TruCoax 1000 an energy-efficient and compact laser that customers can easily integrate into their own individual systems. TruCoax 1000 is completely maintenance-free, so there is no need to replace premix gas or HF tubes or even for a refurbishment. 


Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now
ILS Blogs
David Belforte
David Beleforte

Let's grow LME

Mon Apr 22 08:51:00 CDT 2013

Looked at manufacturing lately?

Wed Mar 20 09:57:00 CDT 2013

Industrial laser market meets forecast

Fri Mar 08 10:59:00 CST 2013

Photonics West features ultra-fast and fiber lasers

Mon Feb 18 13:31:00 CST 2013

Follow us at Join us on

Twitter - Industrial Laser Solutions

PRESS RELEASES

Replacement lenses from II-VI Infrared eliminate need for beam centering

II-VI Infrared, the world leader in CO2 laser optics, is now providing replacement Trumpf Cut Len...

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS