Laser Research Optics makes molybdenum CO2 laser mirrors available

Laser Research Optics, Providence, R.I., has made available a full line of CO2 molybdenum laser mirrors that are suited for low- and high-power lasers used in harsh industrial environments.

LRO's molybdenum mirrors are made from this intrinsically hard material that does not require coatings to achieve >98.1% average reflectance at 10.6 µm at 45° AOI, with <1.9% absorption and scatter. Designed for use in dirty industrial environments, molybdenum mirrors have no coatings that can degrade and are suitable for low- and high-power lasers.

Manufactured from pure vacuum ARC cast low carbon molybdenum, LRO molybdenum mirrors are offered in 1/4 inch to 1 inch dia. sizes for low power lasers and 1 inch to 3 inch dia. sizes for high power lasers, with thicknesses from 3 mm to 10 mm. Suitable for lasers from 20 watts to kilowatts in power, applications include laser engraving, marking, cutting, hole drilling, and welding.



ILS_2011_12_LRO_JM

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now

Follow us at Join us on

Twitter - Industrial Laser Solutions

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS