Tracking the contour in laser materials processing

Aachen, Germany – The Fraunhofer Institute for Laser Technology (ILT) has developed a process monitoring system that can precisely measure the position and speed of the laser beam processing point on the surface. This enables deviations from the set contour and speed to be minimized and the energy input to be stabilized.

In recent years, the use of modern solid-state lasers has brought about a distinct increase in operational speed in laser materials processing. Whether with scanners or fixed optics, high speeds – as far as possible in various axes at the same time – have almost become the norm. But although the movement of the optic is precisely calculated, the position of the processing point can deviate from the planned contour. Help is at hand, thanks to a process monitoring system that precisely tracks the relative movement of workpiece and optic. It enables acceleration-related deviations from the set contour and speed to be measured exactly and the numerical control system to be adjusted accordingly.

Research scientists at the ILT have developed a camera-based system that analyzes the movements of the workpiece through the optical axis of the laser beam before or during processing. It does not matter whether a fixed or scanner optic is used; in both cases, the system measures the movement of the processing point on the workpiece and documents deviations from the set contour during machine setup or operation.

The process monitoring system uses image sequence frequencies of up to 10 kHz. In various applications, contours have been measured with a processing speed of up to 10 m/min (fixed optic) and up to 15 m/s (scanner optic). The deviation from a reference system was less than 3 cm/min. At present the measured data are evaluated separately. While the same technology does permit real-time measurement (there are no technical barriers to this), the accuracy class has not yet been completely specified.

The special design of the system means that it can be used in a very wide range of applications, including laser cutting and welding, soldering, drilling, ablation, micro-joining, SLM and hardening. The various modes of operation are interesting both for system integrators and for end users.

On the one hand, the system can track the processing point during machine setup, enabling the planned contour to be adjusted. On the other hand, the system permits process control during actual operation. This means that the processing contour can be adjusted and the laser output can be controlled to ensure an even energy input at different laser spot speeds. That is a critical factor in particular when processing thin materials. As a result, existing processes can be optimized and new processes are made possible.

In addition to application tests, the specialists at ILT provide full support for integration of the process monitoring system in their customers’ systems. This includes calibration of the system and adaptation to the customer’s optical equipment.

The system will be presented at LASER World of Photonics in Munich from May 23 to 26, 2011, at the joint Fraunhofer booth (Hall C2, Booth 330).


 

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now

Follow us at Join us on

Twitter - Industrial Laser Solutions

RELATED PRODUCTS

There is no current content available.
RELATED COMPANIES
There is no current content available.

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS