Laser Components develops Flexpoint laser modules for microscopic applications

Laser Components USA, Hudson, N.H., has developed Flexpoint laser modules specifically for applications where a microscope is used as the optical source of magnification. Since laser markings often appear out of focus and way too large when working with magnification optics, these laser modules display a "clean" spot even at multiple levels of magnification.

Click to Enlarge

Inside the module, high quality optical elements are used and adjusted manually to obtain the optimal alignment position, allowing, for example, a beam diameter of 0.020 mm to be achieved at a distance of 100 mm (1/e2).

Despite the complexity of the optics, the external dimensions could be kept small at 95 mm in length and 12 mm in diameter. Both the wavelength and the output power can be adjusted to meet user needs.

The modules are available at operating voltages of 4.5 to 6 VDC or 8 to 30 VDC. Due to a low power consumption of less than 50 mW at an output power of 0.5 mW, the Flexpoint can generally be connected to existing electric circuits.

Other properties include features potential-free housing and reverse voltage protection.

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now

Follow us at Join us on

Twitter - Industrial Laser Solutions


There is no current content available.
There is no current content available.

See Article Archive

View Industrial Laser Solutions past articles.

Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS