Compact 20W fiber laser marker

With the TF420 fiber laser marking solution, Technifor has brought out a unit that is twice as compact as the previous generations, while keeping the same marking quality level, and providing a writing speed of up to 2.5m/s and a skipping speed of up to 5m/s. It is designed for applications involving medium to large production runs: motor vehicles, medical fields, electrical or mechanical components, and so on.

Thanks to its light source (diode laser) placed remotely in the control unit, its latest-generation new electronics, and a reduced number of optical components, the marking head takes up a volume of just 10 cu. dm, that is, only half that of the previous models (diode-pumped laser). The light beam travels to the marking head along an optical fibere. The remote control unit can be fitted in a 19in rack and it features an integrated buffer memory.

The use of a fiber laser increases the diode service life to 100,000 hours, whereas beforehand, in the case of a diode-pumped laser, it was necessary to replace the diode every 10,000 hours of use. The TF420 marking head and its control unit have been designed with the lowest possible number of optical elements (no Q-switch, no crystal, no RF driver), to reducefmaintenance and avoid drift in the settings of the optical components, to ensure constant marking quality over time. Additionally, an electronic safety system featuring a reflectivity alarm stops the laser if the reflection level from the part is too high, and prevents laser damage in the event of incorrect parameterization.

The TF420 marking solution includes the intuitive, ergonomic Technifor T700W marking program. Its interface enables users to program the simplest marking sequences in less than 5 clicks. It manages traceability data (serial number, variables, Data Matrix codes, bar codes, etc.) and it links up easily to production databases (ODBC, Excel, ASCII, etc.). Materials libraries with pre-programmed parameters are provided, together with generation of record files.

The TF420 system can be used to mark a wide range of materials, including plastics, metals, or ceramics, and also difficult surfaces such as cast aluminium, steel, or titanium. It provides many marking grades, because its range of operating frequencies is the widest on the market, varying from 20 to 100 kHz with a maximum energy level of 1 mJ.

Technifor provides an optional integration and customization aid, together with marking systems for samples or first articles of series.

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now
ILS Blogs
David Belforte
David Beleforte

Let's grow LME

Mon Apr 22 08:51:00 CDT 2013

Looked at manufacturing lately?

Wed Mar 20 09:57:00 CDT 2013

Industrial laser market meets forecast

Fri Mar 08 10:59:00 CST 2013

Photonics West features ultra-fast and fiber lasers

Mon Feb 18 13:31:00 CST 2013

Follow us at Join us on

Twitter - Industrial Laser Solutions

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS