Tailored strips direct from coil

September 15--ThyssenKrupp Tailored Strips offer new perspectives to manufacturers of steel profiles or other formed parts. Seat rails, seat backrests, exhaust components, and wheel rims could in the future all be manufactured from steel strips that are adapted from the outset to the stresses in the finished part.

ThyssenKrupp Tailored Blanks GmbH supplies ThyssenKrupp tailored strips in coils of up to 15 metric tons. A unique line developed by ThyssenKrupp Tailored Blanks joins steels of different thickness, grade, or coating by an uninterrupted laser weld several hundred meters long.

Steel profiles are formed by running slit steel strip through a profiling line with several roller sets arranged in sequence. The roller sets bend the steel strip step by step to the cross section required for its later use.

ThyssenKrupp tailored strips can be made from steels of different thickness or strength, allowing the production of profiles that are ideally adapted to the actual stresses in the finished part. This eliminates the need for the subsequent reinforcement of highly stressed areas and allows customers to dispense with complete production steps.

Laser-welded strips also meet corrosion protection requirements more cost-effectively: the strips can be made up of coated and non-coated steel or a combination of carbon and stainless steel. These stress-oriented strips also permit similar weight reductions to tailored blanks of over 20 percent.

Profiles are formed in a continuous process that requires the use of strip from a coil. Tailored laser welded blanks developed in the 1980s comprising steels of different thickness, grade, or coating are not suitable for this purpose. Until recently, joining long steel strips with an uninterrupted laser weld was regarded as technically impossible. Three-meter welds were the limit, and then only if the individual blanks were at least 200 millimeters wide.

The problem is that the laser beam melts the strip edges during laser welding. After a time, the strips heat up to such an extent that they distort, increasing the gap between them. However, this gap must not exceed 0.08mm. The tailored strips line operated by ThysssenKrupp Tailored Blanks at its Dortmund plant reportedly is the first laser welding line capable of coping with this problem, thanks to a newly developed weld cooling system. In addition, the stationary laser welding head under which the steel strips pass can swivel by five millimeters to each side, allowing it to follow irregularities in the joining gap.

To keep these irregularities to a minimum, the steel strips pass through levelers before they are guided to the welding station. The edges of the strips can also be prepared for welding by scraping, milling, or rounding. The tailored strips line in Dortmund can process slit steel strips in widths of 50 to 700 millimeters and thicknesses of 0.8 to 2.5 millimeters.

For more information, visit www.thyssenkrupp.com.

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now
ILS Blogs
David Belforte
David Beleforte

Let's grow LME

Mon Apr 22 08:51:00 CDT 2013

Looked at manufacturing lately?

Wed Mar 20 09:57:00 CDT 2013

Industrial laser market meets forecast

Fri Mar 08 10:59:00 CST 2013

Photonics West features ultra-fast and fiber lasers

Mon Feb 18 13:31:00 CST 2013

Follow us at Join us on

Twitter - Industrial Laser Solutions

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS