Galvanometer scanning speeds laser processing

Laser materials processing using scan systems eliminates mechanical tool wear and offers flexibility without retooling

Andreas Engelmayer

Over the past 20 years, laser processing systems have found their way into countless industrial applications such as welding, cutting, scribing, engraving, drilling, and marking. Galvanometer scan systems are frequently employed to rapidly and precisely position the laser spot onto the workpiece. Such systems deflect the laser beam in a controlled manner in two dimensions via a pair of rotatable mirrors. The laser beam can be positioned with pinpoint accuracy and specified patterns can be traversed by the beam at defined speeds. The contour traced by the laser spot is determined solely by the scan head’s controller.

Laser materials processing via scan systems offers a number of advantages compared to conventional solutions:

  • High dynamic performance and processing speeds
  • Elimination of mechanical tool wear
  • Contact-free processing
  • Small, exactly defined heat affected zones
  • Exceptional flexibility without retooling

Applications

Laser marking is a key application for galvanometer scan systems. Laser-marked text is permanent, has good legibility, and requires no consumables. This application is ideal for expiration codes on food packaging or for text on ATM cards and personal IDs.

Scan systems are used in numerous other applications, too, such as high-precision material processing, in the electronics industry (silicon processing, PCB drilling), medical technology (Lasik eye surgery, OCT), rapid manufacturing (stereolithography, laser sintering/melting), and cutting or welding with laser powers into the kilowatt range.


FIGURE 1. Scan heads are available in various configurations for a range of requirements and applications.
Click here to enlarge image

Because of differing requirements concerning laser power, precision, and processing speeds, numerous scan system configurations are on the market. Figure 1 shows an overview of various applications, their requirements, and appropriate scan heads.

Setup

Regardless of the application, laser materials processing systems essentially rely on the following components: laser source, beam shaping, beam positioning, and controller. Additional application-specific components may also be used, such as handling systems, image processors, or process control equipment. The basic scan head system setup is illustrated in Figure 2, and diverse focusing-optic variants are depicted in Figure 3.


FIGURE 2. Setup of a scan head-based laser system. Focusing is provided by an F-Theta flat field objective; the varioSCAN unit enables positioning of the focus along the Z-axis.
Click here to enlarge image

For focusing, a special flat field optic, an F-Theta objective, is typically used and mounted at the scan head’s beam exit. This objective focuses the collimated laser beam independently of the deflection mirror’s position and always within a plane. Such F-Theta objectives are available for a wide variety of wavelengths and focal lengths. The side length of the resulting image field is usually 50-70 percent of the objective’s focal length. Telecentric F-Theta objectives, available for micro materials processing, focus the laser beam perpendicularly to the image field, typically with a side length of up to 50 mm.


FIGURE 3. Laser beam focusing via scan systems (from left): pre-focusing lens, F-Theta objective, dynamic pre-focusing, and combining dynamic pre-focusing with an F-Theta objective.
Click here to enlarge image

The focus diameter is determined by the objective’s focal length, ƒ, and thus the processable surface area, together with the laser type and the scan head’s aperture. For a Gaussian beam profile, the focus diameter, s, can be calculated using the following formula:

s = λ ƒ M2 k / d

whereby λ is the laser wavelength, M2 is the beam quality, and d is the beam diameter prior to entering the focusing optics. The factor k accounts for laser beam diffraction by apertures or in objectives. To maximize power density at the focus, and thus processing speed, the beam width should be expanded to nearly equal the scan head’s aperture. In this case, k = 1.83. Typical configurations and their achievable spot sizes are listed in the table.

Click here to enlarge image

In some applications, rapidly moving lens systems are placed in front of the scanners for focusing the laser beam by adapting the focal length to the distance between the deflection mirror and the laser beam’s destination point on the workpiece. Such varioSCAN optics are particularly useful when no appropriate F-Theta objectives are available - e.g. for large beam diameters or image fields, high laser powers, or exotic laser wavelengths. Moreover, these varioSCAN optics enable 3D processing within scan volumes and can be used alone or along with F-Theta objectives.


FIGURE 4. User-friendly GUI software (Alase Technologies Inc. and American LaserWare Inc.) provides the interface between the user and the scanner controller.
Click here to enlarge image

DSP control boards, with on-board memory, function as the hardware interface between the application software, scan head, and laser. These boards synchronize laser control with the scanner movements and implement image correction to ensure that text is precisely positioned without pin-cushion distortion and marked at a constant speed. Third-party software packages are available for many standard laser marking applications.

For micro materials processing, special scan heads are available with precision-optimized dynamics and actively cooled motors and/or electronics to minimize long-term drift. Scan heads from 14 mm aperture can be equipped with supplementary high-precision position detectors for automatic self-calibration.

Innovations

New materials, laser sources, and manufacturing advances will lead to strong growth of scan systems for materials processing.

Next-generation scan systems will feature fully digital control electronics for the scanner motors (see Figure 5). This technology increases processing speeds and enables scanner dynamics to be tailored to specific applications. Optimized parameter sets for particular products or processing steps can be stored and changed via software whenever required.


FIGURE 5. Fully digital intelliSCAN 10 for demanding applications.
Click here to enlarge image

A further advantage is the ability to monitor the scan system’s status parameters via software, opening up new possibilities in areas such as remote diagnosis and customer support. The scanner’s position and speed can be queried digitally and employed for further processing. This facilitates innovative solutions such as speed-dependent laser control for faster processing and higher quality.

Andreas Engelmayer is in technical sales at SCANLAB AG, Puchheim, Germany. Contact info@scanlab.de or visit www.scanlab.de.

Get All the Industrial Laser Solutions News Delivered to Your Inbox

Subscribe to Industrial Laser Solutions Magazine or email newsletter today at no cost and receive the latest news and information.

 Subscribe Now
ILS Blogs
David Belforte
David Beleforte

Let's grow LME

Mon Apr 22 08:51:00 CDT 2013

Looked at manufacturing lately?

Wed Mar 20 09:57:00 CDT 2013

Industrial laser market meets forecast

Fri Mar 08 10:59:00 CST 2013

Photonics West features ultra-fast and fiber lasers

Mon Feb 18 13:31:00 CST 2013

Follow us at Join us on

Twitter - Industrial Laser Solutions

See Article Archive

View Industrial Laser Solutions past articles.

  •  
  •  
  •  
Copyright © 2007-2016. PennWell Corporation, Tulsa, OK. All Rights Reserved.PRIVACY POLICY | TERMS AND CONDITIONS